Disassembly - Jack LaLanne's MT-1020 Operating Manual

IMPORTANT: Before disassembling the unit make sure you turn the
power OFF and unplug the AC cord from the electrical outlet.
STEP 1:
Remove pusher from the chute.
STEP 2:
Lower the locking bar (silver)
into the disengaged position
as shown.
STEP 3:
Remove lid with built-in
pulp guard by pulling off
of receptacle.

DISASSEMBLY

6
1
Pusher
Chute
2
3
Lid with
Built-In Pulp
Guard
Pulp
Collector
Locking Bar
Receptacle