Disassembly - Jack LaLanne's Power Juicer Pro Operating Manual

DISASSEMBLY

1
Pulp Guard
STEP 1:
Remove pusher from the chute.
3
STEP 3:
Remove lid with pulp guard, and pulp
collector.
5
Filter
STEP 5:
Remove filter.
6
Pusher
Lid with
Pulp Guard
Pulp
Collector
IMPORTANT: Before disassembling the unit
make sure you turn the power OFF and unplug
the machine from the electrical outlet.
2
Locking Bar
STEP 2:
Lower the locking bar (silver) into
position as shown.
4
Crescent Tool
STEP 4:
Use the black crescent tool to remove
the blade. Place the two pegs at either
end of the crescent tool into the two
holes on the blade, press down and turn
counter-clockwise to unlock the blade.
Remove blade carefully.
6
Receptacle
STEP 6:
Make sure spout is in the upright
position to avoid leakage. Remove
receptacle from base.
Blade
Base