Three Year Limited Warranty; 90 Day Money Back Guarantee; Troubleshooting Guide - DeWalt DW715 Instruction Manual

Three Year Limited Warranty

D WALT will repair, without charge, any defects due to faulty materials or workmanship for
E
three years from the date of purchase. This warranty does not cover part failure due to normal
wear or tool abuse. For further detail of warranty coverage and warranty repair information,
visit www.dewalt.com or call 1-800-4-D
E
apply to accessories or damage caused where repairs have been made or attempted by
others. This warranty gives you specific legal rights and you may have other rights which vary
in certain states or provinces.In addition to the warranty, D
1 YEAR FREE SERVICE
D WALT will maintain the tool and replace worn parts caused by normal use, for free, any time
E
during the first year after purchase.
TROUBLE! WHAT'S WRONG?
Saw will not start 1. Saw not plugged in
2. Fuse blown or circuit breaker tripped
3. Cord damaged
4. Brushes worn out
Saw makes 1. Dull blade
unsatisfactory cuts
2. Blade mounted backwards
3. Gum or pitch on blade
4. Incorrect blade for work being done
Blade does not come 1. Extension cord too light or too long
up to speed
2. Low house current
Machine vibrates 1. Saw not mounted securely to stand
excessively or work bench
2. Stand or bench on uneven floor
3. Damaged saw blade
Does not make accurate 1. Miter scale not adjusted correctly
miter cuts
2. Blade is not square to fence
3. Blade is not perpendicular to table
4. Workpiece moving
Material pinches blade 1. Cutting bowed material
WALT (1-800-433-9258). This warranty does not
WALT tools are covered by our:
E

Troubleshooting Guide

BE SURE TO FOLLOW SAFETY RULES AND INSTRUCTIONS
WHAT TO DO
1. Plug in saw.
2. Replace fuse or reset circuit breaker.
3. Have cord replaced by authorized service center.
4. Have brushes replaced by authorized service center or replace them yourself. Refer to Brushes.
1. Replace blade. Refer to Changing or Installing a New Saw Blade.
2. Turn blade around. Refer to Changing or Installing a New Saw Blade.
3. Remove blade and clean with turpentine and coarse steel wool or household oven cleaner.
4. Change the blade type. Refer to Saw Blades under Accessories.
1. Replace with adequate size cord. Refer to Use Proper Extension Cord under Important Safety
Instructions.
2. Contact your electric company.
1. Tighten all mounting hardware. Refer to Bench Mounting.
2. Reposition on flat level surface. Refer to Familiarization.
3. Replace blade. Refer to Changing or Installing a New Saw Blade.
1. Check and adjust. Refer to Miter Scale Adjustment under Adjustments.
2. Check and adjust. Refer to Miter Scale Adjustment under Adjustments.
3. Check and adjust fence. Refer to Bevel Square to Table Adjustment under Adjustments.
4. Clamp workpiece securely to fence or glue 120 grit sandpaper to fence with rubber cement.
1. Refer to Bowed Material under Special Cuts.

90 DAY MONEY BACK GUARANTEE

If you are not completely satisfied with the performance of your D
Nailer for any reason, you can return it within 90 days from the date of purchase with a receipt
for a full refund – no questions asked.
LATIN AMERICA: This warranty does not apply to products sold in Latin America. For
products sold in Latin America, see country specific warranty information contained either in
the packaging, call the local company or see website for warranty information.
FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are
missing, call 1-800-4-D WALT (1-800-433-9258) for a free replacement.
E
Please refer to the beginning of the manual for labels.
15
WALT Power Tool, Laser, or
E