Rheem 874 Owner's Manual And Installation Instructions page 32

TEMPERATURE CONTROL – DELUXE
Bath Fill Mode – Explanatory Notes
To operate the Bath Fill mode:
Turn off all Deluxe controllers
1.
It is advised to turn off all Deluxe controller(s) before

activating the Bath Fill mode.
Refer to the notes on the
controllers on page 28.
The Deluxe controllers do not need to be on to set
the bath fill temperature and bath fill water volume
and to turn on the Bath Fill mode.
Pull down the front panel on the Deluxe controller.
2.
The BATH FILL
TEMPERATURE up () and down () buttons will be
exposed.
3. Set the bath fill temperature
Press the BATH FILL TEMPERATURE (up button)

or the BATH FILL TEMPERATURE (down button).
The first press
TEMPERATURE (up button) or the BATH FILL
TEMPERATURE (down button) will bring up the last
selected bath fill temperature setting.
While the bath fill temperature is displayed, each
subsequent
TEMPERATURE
TEMPERATURE (down button) will change the
temperature setting.
"Temperature Adjustment – Deluxe
Refer to
Controllers"
on page 25.
When the
(up button) is pressed and the temperature setting
is increased, the voice prompt will sound;
"hot water temperature has been increased"
When the BATH FILL TEMPERATURE (down button) is pressed and the temperature setting is
decreased, the voice prompt will sound;
"hot water temperature has been decreased"
The selected temperature setting will be displayed in the temperature display panel and will be
displayed on all Deluxe controllers.
The temperature display panel will go blank 3 seconds after the last press of either of the bath fill
temperature adjustment buttons.
The bath fill temperature setting will be remembered when the BATH FILL button is pressed "on".
Bathroom Deluxe
VOLUME and
of either the
press of the
(up button) or
BATH FILL TEMPERATURE
1 2 0
BATH (l)
BATH FILL
BATH FILL
VOLUME
B1
BATH FILL
1. 2.
Bath Fill
Bath
Water
Volume
Set Bath Fill Water Volume
and Temperature
Hot Water 1.
ON/OFF
Press
BATH FILL
1 2 0
BATH (l)
BATH FILL
BATH FILL
BATH FILL
VOLUME
B1
Bath Fill 1.
Bath
Water
Volume
Set Bath Fill Water Volume
and Temperature
Hot Water
Press
32
ACTIVE
°C
4 0
ON/OFF
BATH FILL
TEMPERATURE
Rheem
3. 5. 7.
Bath Fill
completed
Bath
BATH FILL BATH FILL
Fill Press Bath (automatic) Press Bath
Temp
Bath Fill Button
Fill Button Fill Button
(Red light flashes)
(Red light on) (R ed light off)
4. Open hot tap 6. Close hot tap
2. 3. 4.
ACTIVE Adjust Open hot
Light on Temperature tap
ACTIVE
°C
4 0
BATH FILL ON/OFF
"hot water
temperature
BATH FILL
has been
TEMPERATURE
Rheem increased"
"hot water
temperature
2. 3. 5. 7.
Bath Fill
has been
completed
Bath BATH FILL BATH FILL
Fill (automatic)
Press Bath Press Bath
Temp
Fill Button Bath Fill Button Fill Button decreased"
(Red light on) (Red light flashes) (R ed light off)
4. Open hot tap 6. Close hot tap
1. 2. 3. 4.
ACTIVE Adjust Open hot
ON/OFF
Light on Temperature tap
or