Blacklist - Philips M660 Extended User Documentation

Change the barring PIN/passcode
1
Press MENU/OK.
2
Select [Services] > [Call barring] >
[Change PIN], then press MENU/OK to
confirm.
3
Enter the old barring PIN/passcode. The
default PIN is 0000. Then press MENU/OK
to confirm.
4
Enter the new PIN/passcode, then press
MENU/OK to confirm.
5
Enter the new PIN/passcode again, then
press MENU/OK to confirm.
» The setting is saved.

Blacklist

You can put numbers into the blacklist to block
incoming calls to certain undesirable numbers.
You can create 4 sets of numbers with 24 digits
at maximum for each set of numbers. When
there is an incoming call that starts with one
of these 4 sets of numbers, the ringer will be
muted.
Note
•
Make sure you have subscribed to the caller ID service
before you use this feature.
•
The contact's name in phonebook will not be displayed
if this contact's number matches the record saved in
the blacklist.
32 EN
Activate/deactivate the blacklist
1
Press MENU/OK.
2
Select [Services] > [Blacklist], then press
MENU/OK to confirm.
3
Select [Blacklist mode], press MENU/OK
to confirm.
4
Enter the PIN/passcode. The default PIN is
0000. Then press MENU/OK to confirm.
5
Select [On]/[Off], then press MENU/OK
to confirm.
» The setting is saved.
Add blacklist numbers
1
Press MENU/OK.
2
Select [Services] > [Blacklist], then press
MENU/OK to confirm.
3
Select [Blacklist], then press MENU/OK
to confirm.
4
Enter the PIN/passcode. The default PIN is
0000. Then press MENU/OK to confirm.
5
Enter the number, then press MENU/OK
to confirm.
» The setting is saved.
Change the blacklist PIN/passcode
1
Press MENU/OK.
2
Select [Services] > [Blacklist]> [Change
PIN], then press MENU/OK to confirm.
3
Enter the old barring PIN/passcode. The
default PIN is 0000. Then press MENU/OK
to confirm.
4
Enter the new PIN/passcode, then press
MENU/OK to confirm.
5
Enter the new PIN/passcode again, then
press MENU/OK to confirm.
» The setting is saved.