Advanced Installation - Honeywell RTH2300 Owner's Manual

11 If your system type is...
If your system type is:
q Single Stage Heat and Cool
q Heat Only or Cool Only
Congratulations, you're done!
If your system type is:
q Heat pump
q High efficiency furnace
q Hot water
Continue with Advanced Installation to match your thermostat to your system
type.
If you are not sure of your system type or if you have other
questions, call us toll-free at 1-800-468-1502.
This thermostat works on 24 volt or 750 mV systems. It will NOT work on multi-
stage conventional systems.

Advanced Installation

Enter System Setup
To enter system setup, press and hold
both the and
s t
changes (approximately 5 seconds).
Changing Settings
1. Press the or
s
the setting.
2. Press the and
s
simultaneously for one second to
advance to the next function.
3. Press the RUN button to exit and save
settings.
buttons until the display
button to change
t
buttons
t
q Electric furnace
q Gas/oil steam
q Gravity system
Set
Hold
Run
Heat Off Cool
Heat Off Cool
Set
Hold
Run
8
Fan
Fan
Auto On
Auto On
5
Function
Setting
M33785
5
M33786