Table of Contents
Advertisement
<Digital I/O> Test Screen
Connect CN1 to CN2
16 bit up counter is sent to 16 channel DO
16 channel DO is connected to 16 channel DI
16 channel DI are readback and show on the screen
If DO equals DI then OK shown on screen
If DO does not equal DI then Error shown on screen
Press <p> pause screen, press <p> again release screen
Press <Up> key to increase the screen delay
Press <Down > key to decrease the screen delay
Press <ESC> key to quit
OME-A-822PGL/PGH Hardware Manual ---- 52
Advertisement
Table of Contents
