Scart Output; Connecting A Game Console Or Camcorder - Pioneer PDP-LX6090 Operating Instructions Manual

12 Using with other equipment
• Select the input source on the flat screen TV depending on the
terminal to which the output of the DVD/HDD recorder (DVR)
has been connected; for the above connection example, select
"INPUT 2".
• When you complete the connections and setups, you can then
enjoy timeshift playback with the DVD/HDD recorder (DVR). You
can also select the 2-screen or picture-in-picture mode to watch
images coming from the DTV input source and an external input
source ("INPUT 2" for the above connection example) to which
the output of the recorder has been connected.
Note
• Some DVD/HDD recorders (DVRs) may not allow timeshift
playback. Check the operation manual that came with your
recorder.
• For details about connection and setting procedures, see the
operation manual that came with your DVD/HDD recorder
(DVR).
Switching the SCART output
Video and audio signals output from INPUT 2 and INPUT 3 sources
are the same as those used for the current image display. You can
however change the setting so that DTV signals are always output
regardless of the current image display.
1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "SCART Output" (/ then ENTER).
4 Select a desired parameter (/ then ENTER).

SCART Output

Auto
Fixed on DTV
Item Description
Auto Outputs video and audio signals coming from the
(default)
selected input source
Fixed on DTV Always output DTV signals
5 Press HOME MENU to exit the menu.
Note
• The following operations are given higher priority over the above
setting:
•Presetting a DTV programme for recording
•Execution of WYSIWYR (page 59)
• While in analogue TV mode, no signal is output even if "Fixed on
DTV" is selected for "SCART Output".
• When the Home Gallery screen is displayed, no signal is output
even if "Fixed on DTV" is selected for "SCART Output".
60
Downloaded From TV-Manual.com Manuals
En
Connecting a game console or
camcorder
Use the INPUT 5 terminals to connect a game console, camcorder
and other audiovisual equipment.
Audio/Video cable
Game console/camcorder
Displaying an image from the game console or
camcorder
To watch an image coming from the game console or camcorder,
press INPUT 5 on the remote control unit or press INPUT on the flat
screen TV to select "INPUT 5".
Note
• Connect external equipment to only terminals that are to be
actually used.