Pioneer PDP-LX6090 Operating Instructions Manual page 66

12 Using with other equipment
Enjoying through USB interface (Home
Gallery function)
On this system, you can watch JPEG images that have been
captured and stored in memory cards using a digital still camera.
You can also connect your digital camera directly to the flat screen
TV using a USB connector cable.
Digital still
USB connector cable
camera
USB flash drive
Multi-card reader
Note
• A single USB device can only be connected at a time. No USB
hub can be connected.
• Such devices as a printer or keyboard cannot be connected and
used.
Readable memory cards
This system can read memory cards whose formats are FAT16,
FAT32, or VFAT.
Readable data files
This system can read only JPEG files that meet the following
conditions:
• Extensions are JPG or JPEG.
• JPEG 4:2:2 and 4:2:0 format
• The image resolution must be less than 3264 pixels in the
horizontal direction and 2448 pixels in the vertical direction.
• The image resolution must be higher than 160 pixels in the
horizontal direction and 120 pixels in the vertical direction.
Note
• This system may not be able to display images, depending on
the type of your memory card, or camera.
• This system may not be able to display images modified or
edited using a personal computer or other equipment.
• This system complies with the USB Mass Storage Class, SIC
(Still Image Capture) Class + PTP and Multiple LUN (Logical
Unit Number) Class.
66
Downloaded From TV-Manual.com Manuals
En
Image data display
Connecting a USB device
Hold the USB device's connector with its top side facing the front
panel, and then insert it into the USB port on the side of the flat
screen TV.
• Insert the USB device's connector as far as it goes.
• When using the USB connector of your device, connect it
directly to the USB port.
Side of the flat screen TV
USB flash drive or
multi-card reader
Removing a USB device
To remove a USB device's connector, quit the Home Gallery screen
and then remove it.