Pioneer PDP-LX6090 Operating Instructions Manual page 76

13 Using the HDMI Control
Connecting a DVD recorder
Rear view
Note
• Maximum number of devices that can be connected and
controlled using the remote control unit of the flat screen TV is
as follows: recorder x 2, player x 2, AV system or HD AV
Converter x 1.
• When connecting an AV system or HD AV Converter, be sure to
place and connect it between the flat screen TV and recorder or
player.
• Do not connect an AV system that does not support the HDMI
Control functions between the flat screen TV and a recorder/
player, otherwise the HDMI Control functions may not operate
properly.
• When connecting an AV system that does not support the HDMI
Control functions and a player/recorder that supports the HDMI
Control functions to the flat screen TV, connect the AV system
to the DIGITAL OUT terminal and the AUDIO OUT terminal on
the flat screen TV using an optical digital cable and a stereo
audio cable, and the recorder/player to the HDMI terminal using
an HDMI compliant cable (see the illustration on the right).
Please note that signals input from the HDMI terminals will not
be output from the DIGITAL OUT terminal.
• The HDMI Control functions may not operate properly if you do
not use an HDMI cable that supports the HDMI Specification.
76
Downloaded From TV-Manual.com Manuals
En
T T
W W
HDMI compliant cable
(HDMI cable having the
HDMI mark)
DVD recorder
T
W
Rear view
Stereo
audio cable
HDMI compliant cable
(HDMI cable having the
HDMI mark)
DVD recorder
• After making connections, enter the setting in "Input Setting"
for "HDMI Control Setting". Be sure that the setting is entered
in each HDMI input terminal to which the device is connected.
• You cannot connect and use an AV system and HD AV
Converter at a time.
• Settings in the connected device(s) are also required to use the
HDMI Control functions. For details, see the operation manual
that came with the connected device(s).
• When a recorder is connected, its power is automatically
switched on as the flat screen TV is turned On to help make the
recording smoother.
• When the image from a BD/DVD player or DVD recorder
connected through an HDMI Control supported AV system is
switched to display on sub screen in the 2-screen or picture-in-
picture mode, the sub screen turns black without displaying any
image.
• For more information on the devices that support the HDMI
Control functions, check the Pioneer Web site (see back cover).
T
W
Optical digital
cable
AV amp