Video Input - Vivotek IB9371-HT User Manual

VIVOTEK
type
ipv4list_i<0~9>
ipv6list_i<0~9>

7.8Video input

Group: videoin
NAME
cmosfreq
whitebalance
<product dependent>
162 - User's Manual
0, 1 6/6
Single address: <ip 6/6
address>
Network address:
<ip address /
network mask>
Range
address:<start ip
address - end ip
address>
string[43] 6/6
VALUE SECURITY
(get/set)
50, 60 4/4
auto, 4/4
manual,
rbgain,
widerange,
outdoor,
indoor,
sodiumauto,
etc
(Available values are
listed in
"capability_image_c
<n>_wbmode")
Ipfilter policy :
0 => allow
1 => deny
IPv4 address list.
IPv6 address list.
DESCRIPTION
CMOS frequency.
(capability.videoin.type=2)
Modes of white balance.
"auto": Auto white balance
"rbgain": Use rgain and bgain to set white
balance manually.
"manual": 2 cases:
a. if "rbgain" is not supported, this means
keep current white balance status.
b. if "rbgain" is supported, "rgain" and
"bgain" are updated to the current values
which is got from white balance module. Then,
act as rbgain mode
"widerange": Auto Tracing White balance
(2000K to 10000K).
"outdoor": auto white balance mode
specifically for outdoor.
"indoor": auto white balance mode
specifically for indoor.
"sodiumauto": sodium vapor lamps.