Adaptive Cruise Control - Cadillac 2016 CTS Manual

Hide thumbs Also See for 2016 CTS:
Table of Contents

Advertisement

Also, you may have to brake or shift
to a lower gear to keep the vehicle
speed down. If the brake pedal is
applied, cruise control disengages.
Ending Cruise Control
There are four ways to end cruise
control:
Step lightly on the brake pedal.
Press
.
Shift the transmission to
N (Neutral).
J
Press
.
Erasing Speed Memory
The cruise control set speed is
J
erased from memory if
pressed or if the ignition is
turned off.

Adaptive Cruise Control

If equipped with Adaptive Cruise
Control (ACC), it allows the driver to
select the cruise control set speed
and following gap. Read this entire
section before using this system.
The following gap is the following
time between your vehicle and a
vehicle detected directly ahead in
your path moving in the same
direction. If no vehicle is detected in
your path, ACC works like regular
cruise control. ACC uses camera
and radar sensors.
If a vehicle is detected in your path,
ACC can apply acceleration or
limited, moderate braking to
maintain the selected following gap.
To disengage ACC, apply the brake.
If ACC is controlling your vehicle
speed when the Traction Control
System (TCS) or electronic stability
control system activates, the ACC
may automatically disengage. See
Traction Control/Electronic Stability
Control 0 206. When road
is
conditions allow ACC to be safely
used, the ACC can be turned
back on.
ACC will not engage if the TCS or
electronic stability control system is
disabled.
Driving and Operating
Warning
ACC has limited braking ability
and may not have time to slow
the vehicle down enough to avoid
a collision with another vehicle
you are following. This can occur
when vehicles suddenly slow or
stop ahead, or enter your lane.
Also see Alerting the Driver in
this section. Complete attention is
always required while driving and
you should be ready to take
action and apply the brakes. See
Defensive Driving 0 180.
Warning
ACC will not detect or brake for
children, pedestrians, animals,
or other objects.
Do not use ACC when:
On winding and hilly roads
or when the sensors are
blocked by snow, ice, or dirt.
The system may not detect
217
(Continued)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents