Cadillac 2016 CTS Manual page 134

Hide thumbs Also See for 2016 CTS:
Table of Contents

Advertisement

reading and other numerical values
can be displayed in either English or
metric units.
The language selection is changed
through the radio and the units of
measurement is changed through
the instrument cluster. See Vehicle
Personalization 0 147 and Cluster
Settings Menu under Instrument
Cluster 0 112.
HUD Display on the Vehicle
Windshield
The HUD may display some of the
following vehicle information and
vehicle messages or alerts:
Speed
Tachometer
Audio
Phone
Navigation
Collision Alert
Cruise Control
Lane Keep Assist
Low Fuel
Some vehicle messages or alerts
displayed in the HUD may be
cleared by using the steering wheel
controls. See Vehicle Messages
0 135.
The HUD control is to the left of the
steering wheel.
To adjust the HUD image:
Instruments and Controls
1. Adjust the driver seat.
2. Start the engine.
Use the following settings to adjust
the HUD.
(Image Adjustment) : Press
down or lift up to center the HUD
image. The HUD image can only be
adjusted up and down, not side
to side.
(Display View) : Press to
select the display view. Each press
will change the display view.
(Image Brightness) : Lift up
and hold to brighten the display.
Press down and hold to dim the
display. Hold down to turn the
display off.
The HUD image will automatically
dim and brighten to compensate for
outside lighting. The HUD
brightness control can also be
adjusted as needed.
The HUD image can temporarily
light up depending on the angle and
position of the sunlight on the HUD
display. This is normal.
133

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents