Rear Panel Controls - Ceriatone JM 100w User Manual

4) REAR PANEL CONTROLS

1) HT slow-blow fuse

2) MAINS slow-blow fuse

3) A.C. MAINS IEC cable inlet

4) HALF POWER two-way toggle switch

5) BIAS CHECK multimeter probe jacks

6) SPEAKER OUTPUT ¼" speaker jacks

7) IMPEDANCE three-way rotary selector

8) EFFECTS LOOP RETURN ¼" instrument jack

9) EFFECTS LOOP SEND ¼" instrument jack

HT slow-blow fuse – used to protect your amplifier from voltage spikes or excessive current draw. Replace only when

necessary. 100W model uses 1A, and the 50W uses 0.5A.

MAINS slow-blow fuse – used to protect your amplifier from voltage spikes or excessive current draw. Replace only when

necessary. 100W model uses 4A with a 120VAC country supply, and 3A is used with 240VAC. 50W uses 3A with a 120VAC

country supply, and 2A is used with 240VAC.

A.C. MAINS IEC cable inlet – plug a suitable IEC power cable into this inlet to power your amplifier

Table of Contents