Canon PIXMA mp800 User Manual page 73

W
Note
1
When printing photos with the digital device connected to the machine, it is
advisable to use the AC adapter supplied with the device. If you use the device
battery, be sure to charge it fully.
Set up the machine.
Refer to the Easy Setup Instructions to set up the machine and make it ready for printing.
W
Note
W
Note
W
Note
The Print Head cannot be aligned using the controls of the digital device.
If the Print Head alignment is not yet performed, execute automatic Print
Head alignment, see "Aligning Print Head automatically" on page 106.
2
Turn on the machine.
See "Turning on the Machine" on page 17.
3
Load the paper in the machine.
See "Loading Paper" on page 19.
4
Connect the PictBridge compliant device to the machine.
Depending on the model or brand of your device, you may have to select
a print mode compliant with PictBridge before connecting the device.
You may also have to turn on the device or select Play mode manually
after connecting the device to the machine.
Perform necessary operations according to the instruction manual
supplied with the PictBridge compliant device.
(1) Ensure that the device is turned off.
(2) Connect the device to the machine using the USB cable (for connection to a computer)
supplied with the device.
Some types of the PictBridge compliant devices do not turn on
automatically, when connected to the machine. If the device does not turn
on automatically, turn it on manually.
Chapter 5
Printing Photographs Directly from a Compliant Device
71