Getting Started; Setting Up Your M:robe; Charging The Battery - Olympus m:robe MR-500i User Manual

Getting Started

Setting up your m:robe

Note
Do not connect your m:robe to your computer before installing the supplied Music/Photo Organization Software "m:trip."

Charging the battery

1
Connect the AC cord to the AC adapter.
2
Connect the AC adapter to the DC IN 5V jack of the cradle.
3
Plug the AC cord into a wall outlet.
4
After checking that your m:robe is turned off, place it in its cradle.
D
Cradle (supplied)
Tip
Plug shape differs depending on country.
Charging starts. The LED of the device lights up.
After charging, the LED goes off.
Tips
• The battery is fully charged in about 3 hours.
• The supplied AC adapter is designed only for Olympus products that specify 5V DC input.
AC adapter
A
(supplied)
B
To DC IN 5V jack
Setting up your m:robe
To a wall outlet
C
23