Preventing Unintentional Operations - Olympus m:robe MR-500i User Manual

Preventing unintentional operations

Preventing unintentional operations
– HOLD function
This is used to prevent unintentional operations when carrying your m:robe in a pocket or a bag.
Setting the HOLD function of the device to ON
Press HOLD when the device is turned on.
The screen disappears and the touch panel becomes inactive.
To set HOLD to OFF
Press HOLD again.
Note
If you press and hold POWER/HOLD until the LED flashes, the device is turned off. Press POWER/HOLD to turn the device
on.
Setting the HOLD function of the remote to ON
Slide the HOLD switch in the direction of the arrow.
The buttons on the remote become inactive.
To set HOLD to OFF
Slide the HOLD switch in the opposite direction of the arrow.
22