Mitsubishi Carisma Owner's Manual page 162

FOR PLEASANT DRIVING
To change the language of PTY
display
You can select your favourite language be-
tween English, French, German, Swedish,
Spanish and Italian.
1. Turn off the radio.
2. Turn the radio back on while holding
down the PTY button (B).
3. An alarm will sound and the system
will enter PTY Language Switching
mode.
4. Use the H button (C) or the M button
(D) to select the desired language.
Press the SET button (E) to register
your selection.
5. Press the button on the left (A) to can-
cel the selection. The system will re-
vert to the settings prior to accessing
PTY Language Switching mode.
6–22
Traffic information
The radio will automatically tune in to traffic
information broadcasts while receiving UKW
broadcasts, playing cassettes.
To select this function, follow the instructions
below.
1. Press the TP button (2). The display
will show "TP" (11). If the RDS data can
be read, the display will show
"RDS" (9). If not, the display will show
"NO RDS" for round 5 seconds.
2. If the radio detects traffic information on
either the station currently selected or
on another station, the display will show
"TRAF INF" for 5 seconds followed by a
2-second indication of the frequency.
Then, it will show the name of the station
broadcasting the traffic information to
which you will listen. The volume level is
set separately for listening to normal au-
dio programs and for listening to traffic
information. The volume level will there-
fore change automatically to that set
when traffic information was last re-
ceived. When the traffic information
broadcast is over, the radio will return to
the previously received program and to
the corresponding volume level.
3. Press the TP button (2) to return to the
previous condition.
H11A250g