Table of Contents
Advertisement
H8 DSP
Digital Interface Processor
8.
Windows XP: complete the installation procedure, then select CLOSE to exit the installation;
Windows Vista: complete the installation procedure, then select CLOSE to exit the installation;
Windows 7: complete the installation procedure, then select CLOSE to exit the installation:
Windows 8/10: go on and complete the installation procedure, then select CLOSE to exit the installation;
7.2
DRIVERS INSTALLATION GUIDE
1.
Turn the H8 DSP on.
2.
Connect the USB cable to the dedicated housing on the H8 DSP and to an available USB slot on the PC.
WARNING:
When connecting a laptop PC via USB cable to the H8 DSP while the device is turned on, the laptop has
to work with its own battery and stay disconnected from the mains adapter (external power supply).
Once the connection between the laptop PC and the H8 DSP is established, you can immediately connect
the computer, if necessary, to the mains adapter.
3.
Windows XP: the PC will recognize the H8 DSP interface and will automatically install the driver;
Windows XP
Windows Vista: the PC will recognize the H8 DSP interface and will automatically install the driver;
Windows Vista
Windows 7/8/10: the PC will recognize the H8 DSP interface and will automatically install the driver;
Windows 7 / 8 / 10
4.
The peripheral device has been correctly installed and is ready for use.
Remark: The H8 DSP uses HID drivers already integrated in Windows. For this reason, they are not included in the CD and
will always install automatically.
Windows XP
Windows Vista
Windows 7 / 8 / 10
User's manual 7
20
Hide quick links:
Advertisement
Table of Contents
