Low-Level Input Signals; Optical In Digital Input - Hertz H8 DSP User Manual

H8 DSP
Digital Interface Processor
5.5

LOW-LEVEL INPUT SIGNALS

AUX IN L/R: Auxiliary analog stereo signal.
Sensitivity is adjustable from 0.6 to 5 V RMS
MP3 PLAYER
5.6

OPTICAL IN DIGITAL INPUT

OPTICAL CABLE
AUXILIARY STEREO
PREAMPLIFIER SOURCE
TOSLINK
CONNECTOR
PRE OUT
RADIO DECK
DIGITAL INPUT- WARNING: the digital input accepts up to
96 kHz / 24 bit stereo PCM signals. So DOLBY
DIGITAL (AC3) multi-channel signals coming from
audio/video sources (such as the audio of a film
in DVD) or DTS can not be reproduced. The output
of these devices will therefore be set in STEREO
mode for the signal to be reproduced. If digital
signals at frequency higher than 96kHz (Ex. 192 kHz)
are supplied, the H8 DSP locks up.
User's manual 5
AUXILIARY STEREO
PREAMPLIFIER SOURCE
12