Other Functions; Setting An Index Mark; Clearing An Index Mark - Olympus VN-7600PC Instructions Manual

h Formatting the Recorder [Format]
If you format the recorder, all files will be removed and all function settings will return to defaults except
date and time settings. Transfer any important files to a computer before formatting the recorder.
Notes:
• It may take up to a minute to fi nish the initialization. Do not remove the battery or detach the
battery compartment from the recorder during that time. Otherwise data may be damaged.
• Never format the recorder from a PC.
• When the recorder is formatted, all the stored data, including locked fi les, are erased.
h Viewing System Information
[System]
You can check the recorder's information on the menu screen.

Other Functions

h Index Marks (HQ, SP, LP only)
If index marks are placed, you can quickly find a location you want to listen to in fast forward and
fast rewind and when cuing a file
Cannot place the index mark to the recorded file on the [MP3] mode.

Setting an Index Mark:

Clearing an Index Mark:

Notes:
• Index marks cannot be placed on the recorded file on the [MP3] mode or files created on devices
other than Olympus IC recorders, but temp marks can be placed instead to temporarily remember
desired locations.
• Temp marks are temporary markings, so if you move to another fi le, or connect the recorder to a
computer, they will be automatically erased.
• Up to 16 index and temp marks can be set in a fi le.
• Index or temp marks cannot be set or erased in a locked fi le.
1 The Sub Menu opens.
2 Press the 9 or 0 to
select [Format].
3 Press the PLAY/OK ( `)
button.
• [ ^ ] ] and [Cancel] flashes
alternately.
4 Press the 9 button to
select [Start].
5 Press the PLAY/OK ( `)
button.
• After the [Data All Cleared]
message is on for 2 seconds,
[Sure? Cancel] will turn on.
6 Press the 9 button again to select [Start].
7 Press the PLAY/OK (`) button.
• Formatting begins and [Format Done] displays when
formatting ends.
Format!
1 While the recorder is
during recording (pause
r e c o r d i n g) o r p l ay -
back mode, press the
FOLDER/INDEX button
to set an index mark.
1 Locate the index you
want to clear.
2 Press the 9 or 0
button to select the
index mark to delete.
3 Press the ER ASE (
button.
- -
10
Format: Cancel
Sure?:
Format Done
Recorder's Version
Version : 1.00
Index 06 Set
Index 02
s
)
Index 02 Clear
Cancel