Advertisement
2 Press the + or – button to
select what you would like
to set up.
• The selected menu item flashes.
3 Press the
ton to change the setting.
4 Press the PLAY (`) button
to confirm the setting.
5 Press the STOP (4 ) button to close the
menu.
Notes:
• The recorder will stop if you leave it idle for 3 minutes during a menu setup operation, when a
selected item is not applied.
• If you press the STOP (4) button during a menu setup operation, the recorder will stop and
apply the items that were set to that point.
h Recording Modes [HQ SP LP]
The recording mode can be chosen from [HQ] (high quality sound record-
ing), [SP] (standard recording) and [LP] (long-term recording).
In Menu mode selection...[HQ], [SP], [LP]
HQ
VN-6500
Approx. 40 h.
Approx. 107 h.
VN-6000
30 min.
55 min.
Approx. 20 h.
Approx. 53 h.
VN-5500
VN-5000
5 min.
40 min.
Notes:
• The recording time shown above is for one continuous file. The available recording time may be
shorter than specified if several files are recorded. (Use the remaining time and recorded time
only as references.)
h Microphone Sensitivity [
Microphone sensitivity is adjustable to meet your recording needs.
In Menu mode selection...[
], [
High-sensitivity mode that records
Low-sensitivity mode suited for
sounds in all directions.
dictation.
Notes:
• To ensure successful recording, make a test recording to select
appropriate microphone sensitivity before recording.
• If you select [
], we recommend setting the recording mode to [HQ]
to best take advantage of the higher sensitivity.
• If you select [
], background noise may be high depending on the
recording conditions.
h Using the Variable Control Voice
Actuator [VCVA]
When the microphone senses that sound has reached a preset volume,
the built-in Variable Control Voice Actuator (VCVA) starts recording
automatically, and stops it when the volume drops. Particularly helpful for
extended recording, the VCVA not only conserves memory by turning off
recording during silent periods, but also makes playback more efficient
and convenient.
In Menu mode selection...[On], [OFF]
Notes:
• During recording, press the + and – buttons to adjust the VCVA level in
15 levels.
• The Record/Play indicator light is lit during recording. When the recorder
is in Standby mode, the Record/Play indicator light flashes and [VCVA]
flashes on the display.
h System Sounds [BEEP]
Informs a button operation or a wrong operation of the recorder by sound.
System sounds may be turned off.
In Menu mode selection...[On], [OFF]
Note:
• If the alarm playback function has been set, the alarm will sound at the
scheduled time even if the system sounds are disabled.
or 0 but-
Current recording mode
SP
LP
Approx. 604 h.
15 min.
Approx. 300 h.
30 min.
]
Current microphone
sensitivity
]
VCVA indicator
-
7
-
h Alarm Playback Function [
You can use the alarm playback function to sound the alarm tone for
5 minutes at the scheduled time. Within this 5 minutes, pressing any
button other than the HOLD switch starts the recorder to playback the
preselected file.
In Menu mode selection...[SET], [On], [OFF]
After selecting [SET], press the PLAY (`) button to set the
time.
Note:
• With the alarm playback function, only one file can be played back. Select
a file for the function before setting the time.
To cancel an alarm playback:
] in the menu mode, select [OFF] and press the PLAY (`) button.
For [
Notes:
• Regardless of the selected folder, once the alarm playback is set, it operates every day unless the
setting is canceled.
• To view the current setting, select [On], and press the PLAY ( `) button.
• The alarm tone stops automatically if no button is pressed within 5 minutes after the alarm starts.
The file is not played back in this case.
• If the recorder has no recorded file in the selected folder, the alarm playback function is not
available.
• Alarm playback occurs every day unless it is set to [OFF].
h Timer Recording [TIMER]:
You can schedule for automatic recording, specifying the start time and
end time of recording. When the timer-controlled recording completes,
the setting is released.
In Menu mode selection...[SET], [On], [OFF]
After selecting [SET], press the PLAY (`) button to set the
time.
To cancel the timer setting:
For the timer in the menu mode, select [OFF], and press the
PLAY (`) button.
Notes:
• To view the current setting, select [On], and press the PLAY ( `) button.
• With this function, you can set only the start and the end time of recording. The current settings of
the recording mode, microphone sensitivity, VCVA and folder are applied for the settings before
you set timer-controlled recording.
• The setting exceeding the remaining recording time is not allowed.
• You can record at any time even if it is not within the specified recording duration. However, if that
makes the remaining recording time insufficient for the timer-controlled recording, the recording
will not complete.
• If any operation is ongoing, the timer-controlled recording is overridden.
Other Functions
h Moving File between Folders
You can move files recorded in folders [ ], [ ], [ ] and [ ] to other folders. The moved file is
added to the end of the destination folder.
1 Select the file you want to transfer, and press
the PLAY (`) button to play it.
2 While the recorder is during playback mode,
press and hold the DISP/MENU button for 1
second or longer.
3 Press the 9 or 0 but-
ton to select a destination
folder.
4 Press the PLAY ( `) but-
ton.
a Destination folder
b Destination number of the file
Notes:
• The destination folder and the number of the moved file appear on the display, and moving is
completed.
• If the destination folder is full (100 files), [FULL] appears on the display, and you cannot move the
file to that folder.
]:
Alarm indicator
Timer indicator
a
b
-
8
-
Hide quick links:
Advertisement
