Chevrolet ranger rt Owner's Manual page 29

Bathroom Facilities
26
Shower
Shower connection and knob Shower curtain and light Shower drain
To take a shower, unscrew the drain stopper in the center of the bathroom floor. Release the hook and loop fastener straps
retaining the shower curtain, and slide the shower curtain along its track to enclose the shower space. Screw the end of the
shower hose onto the connection right behind the bathroom sink faucets, and pull the knob on the spout up. Adjust the water
temperature as desired. There is a water cutoff on the shower nozzle to conserve water. When finished, either towel off or air
dry the curtain before storing it, refasten the drain stopper to prevent the contents of the gray water tanks from sloshing up
into the shower area while driving, and remove the shower hose from the sink connection. Push the knob back down to
change the sink back into normal mode.
© 2014 by Roadtrek, Inc.