Panasonic MK-F800 Operating Instructions Manual page 30

Error Mode Indication
Circuit Breaker Protection, High Current Detection and High Voltage Detection
i) Circuit Breaker Protection
No L.E.D.s light up.
Action:
For scenario i) and ii), turn off the Power Switch at the side of Motor Housing, reduce the amount of ingredients into
half and resume operation.
For scenario iii), the Error Mode Indication is shown if voltage above 280 V, use 220 - 240 V.
Motor Overheat
Alternate blinking of Mince
and Intermittent L.E.D.s.
Action:
Turn off the Power Switch, and let the appliance to cool
down (approx. 30 min). Reduce the amount of
ingredients into half and resume operation.
Electronic component malfunction
Alternate blinking of Mince or Chop or Frozen and Continuous L.E.D.s.
Action:
Please contact your nearest service center for repairing.
ii) High Current Detection
Alternate blinking of Chop and
Intermittent L.E.D.s.
or or
30
iii) High Voltage Detection
Alternate blinking of Mince+Chop
and Continuous+Intermittent L.E.D.s.
The Bowl, Blender Unit or Dry Mill Unit is not
properly locked onto the Motor Housing.
Alternate blinking of Mince+Chop+Frozen
and Paste+Drainer+Continuous L.E.D.s.
Action:
Reattach the part onto the Motor Housing in proper
position. (Refer to page 11).