Blender - Panasonic MK-F800 Operating Instructions Manual

BLENDER

Operating with Manual Menu
1
1
2
After completing the assembly steps, plug-in the plug
into the socket and turn on the Power Switch. The Mode
Indication L.E.D.s will light up and blink.
3 3
During the driving operation, the ON/OFF Indication
L.E.D. will remain lit. Push the ON/OFF Switch to stop
the driving operation.
Note:
• If the Cutting Blade gets stuck, switch off immediately and unplug. Do not attempt to proceed to unstuck the
ingredients with your fingers, use an object like a rubber spatula instead.
• During blending, there is a possibility that the ingredients will splash out of the Blender Lid hole. In the
event that it splashes out, wipe it off with a dry cloth.
• Do not operate exceeding the rated operation duration (2 min ON, 2 min OFF).
2
Select the Continuous mode and adjust to the maximum
speed with the Rotary Dial. The more bars are lighted,
the higher the speed. Push the ON/OFF Switch to start
the operation.
4
1
After the processing is completed, switch off the Power
Switch and unplug from the socket. Remove the Blender
Unit from the Motor Housing and proceed to remove
the ingredients.
23
2
3
4