Troubleshooting - Panasonic MK-F800 Operating Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

TROUBLESHOOTING

Please check the following points before arranging for service.
Problem
The appliance does not turn on.
None of the Control Panel
Functions can be selected.
The appliance does not operate
even when the function is started.
The selected function is canceled.
(The Mode Indication L.E.D. starts
blinking).
The appliance suddenly stops
during operation.
 The plug is loose in the outlet.
w
Æ Plug in firmly into the outlet.
 The Power Switch has not been switched on.
Æ Turn on the Power Switch.
 Gloves may cause insensitivity of the Control Panel.
Æ Select the functions with bare fingers.
 Pressing the function at the wrong position.
w
Æ Press firmly on the illustration on the Control Panel.
 The appliance is already operating.
Æ The functions cannot be changed when the appliance is
operating. Stop the previous function before selecting a
new one.
 The Bowl, Blender Unit or Dry Mill Unit is not properly locked
onto the Motor Housing.
Æ Ensure that the triangle mark on the attachments are
aligned with the rectangular mark on the Motor Housing
w
as seen in page 11.
 The Bowl Lid or Citrus Strainer is not fully locked onto the
Bowl.
Æ Fully secure the Bowl Lid or Citrus Strainer onto the Bowl.
 The ingredients are jammed.
Æ Remove the ingredients carefully and ensure that the
amount used is as stated.
 The appliance was left idle for more than 10 seconds after
w
selecting the function.
Æ Ensure that action is done after selecting the function
within 10 seconds.
 The circuit breaker protection is activated. (Refer to page 8)
Too much ingredients were inserted.
Æ Remove the excess ingredients and ensure that the
amount used is as stated.
Large chunks or hard ingredients were used.
Æ Ensure that the ingredients are cut into the stated sizes.
Do not use hard ingredients such as frozen foods or highly
w
dense solids.
 The safety lock was triggered. (Refer to page 8)
Abnormal vibration during operation may offset the safety
lock engagement.
Æ Ensure that the ingredients used and the amount are as
stated.
Æ Lock the Bowl Lid or Citrus Strainer onto the Bowl firmly,
and ensure that the Bowl, Blender Unit, or Dry Mill Unit is
locked firmly onto the Motor Housing.
28
Cause and Action

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents