Setting And Storing Personal Data In Memory - Tanita BC-583 Manual

Setting and storing personal data in memory

You will receive readings only if data has been programmed into one of the personal data memories or the Guest mode.
The monitor can store personal details for up to 4 people.
1. Turn on the Power
Press the Set button to turn on the unit (once programmed, pressing a Personal Key turns
on the unit.) The unit will beep to confirm activation, the Personal Key numbers (1, 2, 3, 4)
will be displayed, and the display will flash.
Note: If you don't operate the unit for sixty seconds after the unit has been turned on, the unit will
turn off automatically.
Note: If you make a mistake or want to turn the unit off before you have fi nished programming it, press the
Weight-Only Key ( ) to force quit.
2. Select a Personal Key Number
Press the Up/Down buttons to select a Personal Key. Once you reach the Personal Key number
you wish to use, press the Set button. The unit will beep once to confirm.
3. Set Age
The display defaults to Age 30 (range of user age is between 5-99). Use the Up/Down buttons
to scroll through numbers. When you reach your age, press the Set button. The unit will beep
once to confirm.
4. Select Female or Male
Use the Up/Down buttons to scroll through Female ( ) or Male ( ), Female/Athlete ( / ) and
Male/Athlete ( / ) settings, then press the Set button. The unit will beep once to confirm.
5. Specify the Height
The display defaults to 5' 7.0" (170 cm) (range of user is from 3' 0.0"–7' 3.0" or 90 cm
– 220 cm). Use the Up/Down buttons to specify Height and then press the Set button. The unit
will beep once to confirm.
4
S E T
GUEST
RECALL