Programming The Guest Mode; Taking Weight Measurement Only - Tanita BC-583 Manual

3. Recall Function
The previous readings of the following features can be obtained using the recall function.
• Weight
• Body Fat %
• Total Body Water %
• Muscle Mass and Physique Rating
To obtain previous readings, press the SET button while the current readings are being displayed.
The display will show the previous readings.
To see other previous readings, press the Up/Down buttons for each desired reading.
Press the SET button again to go back to the current result display.
Note: For Children (age-5-17), the unit will only display the previous Weight and the Body Fat %.

Programming the guest mode

Taking weight measurement only

6
Guest mode allows you to program the unit for a one-time use without resetting a Personal data
number.
Press the Up button to activate the unit. Then follow the steps: Set Age, Select Female or Male, and
Specify Height.
Note: If you step onto the platform before "0.0" appears the display will show "Error" and you will not
obtain a reading.
Select Weight-Only Key
Press the Weight-only key. After 2 or 3 seconds, "0.0" will appear in the display and the unit will
beep. When "0.0" appears in the display, step onto the platform. The body weight value will appear.
• BMR and Metabolic Age
• Bone Mass
• Visceral Fat Level