Olympus DS-3300 Online Instructions Manual page 71

Notes on Recording For Voice Recognition
When recording voice to be
processed with voice recognition, set
up your DSS recorder as follows to
improve recognition accuracy.
• Set the microphone sensitivity to "DICT."
( P.27).
• Set the recording mode to "SP"
( P.28).
• Set the Variable Control Voice Actuator
(VCVA) to "OFF" ( P.29).
• Register/enroll your voice in the voice
recognition software using the recorder.
• Record in a relatively quiet environment.
• Have the recorder microphone 5 to 10
cm (2 to 4 inches) away from your chin.
• Speak normally.
• It is recommended to use the noise-
cancellation microphone, ME12, when
recording.
Dictation files recorded under the
following conditions cannot be
processed by voice recognition
because their recognition accuracy
rates will be very low.
• A conference or meeting where many
voices are recorded.
• Seminar or lecture where high-level
ambient noise tends to be recorded.
5
71