Q Power On - Olympus VR-310/D-720 Instruction Manual

Even if a computer has USB ports, proper operation
is not guaranteed in the following cases.
●
computers with USB ports installed using an
expansion card, etc.
●
computers without a factory-installed OS and
home-built computers
Turning on the camera with the q
Turning on the camera with the

q Power On]

button [ button [q Power On]
r (Settings 1)
Submenu 2
The camera is not turned on. To turn
on the camera, press the n
No
button.
Press and hold the q button to turn
Yes
the camera on in playback mode.
Saving the mode when the camera is Saving the mode when the camera is
turned off [Keep K
turned off [Keep
r (Settings 1)
Submenu 2
The shooting mode is saved when
the camera is turned off and is
Yes
reactivated the next time the camera
is turned on.
The shooting mode is set to P mode
No
when the camera is turned on.
42 EN
For information on using the menus, see "Using the Menu" (p. 4).
q
q Power On
Application
K Settings]
Settings]
Keep K Settings
Application
Choosing the opening screen display Choosing the opening screen display
[Pw On Setup] [Pw On Setup]
r (Settings 1) Pw On Setup
Submenu 2
Off No opening screen is displayed.
The opening screen is displayed
On
when the camera is turned on.
Selecting the camera sound and its Selecting the camera sound and its
volume [Sound Settings] volume [Sound Settings]
r (Settings 1) Sound Settings
Submenu 2 Submenu 3
Sound Type 1/2/3
OFF (No Sound)
q Volume
or 5 levels of
volume
OFF (No Sound)
Volume or 5 levels of
volume
Adjusting the CCD and the image Adjusting the CCD and the image
processing function [Pixel Mapping] processing function [Pixel Mapping]
s (Settings 2) Pixel Mapping
This function has already been adjusted at factory
shipping, and no adjustment is needed right
after purchase. Approximately once a year is
recommended.
Application
Application
Choose the sound
made by camera
controls.
Adjusts the image
playback volume.
Choose the volume
of the sound
made by camera
controls.