This is normal as energy is being converted to heat for dissipation. Figure 1 - 5 - SW-Stahl und Werkzeugvertriebs GmbH Tel. +49 (0) 2191 / 46438-0 www.swstahl.de Leverkuser Straße 65 Fax +49 (0) 2191 / 46438-40 D-42897 Remscheid E-Mail: info@swstahl.de...
Page 6
The speed increases with the amount of depression of the trigger for efficient tightening or loosening of screws. - 6 - - 6 - SW-Stahl und Werkzeugvertriebs GmbH Tel. +49 (0) 2191 / 46438-0 www.swstahl.de Leverkuser Straße 65 Fax +49 (0) 2191 / 46438-40 D-42897 Remscheid E-Mail: info@swstahl.de...
Page 7
If you notice the battery fuel gauge only left with one red light that means the battery is running low. - 7 - SW-Stahl und Werkzeugvertriebs GmbH Tel. +49 (0) 2191 / 46438-0 www.swstahl.de Leverkuser Straße 65 Fax +49 (0) 2191 / 46438-40 D-42897 Remscheid E-Mail: info@swstahl.de...
Battery is approximately 50% charged. Green Flashing Battery is approximately 80% charged. Green Lit Charging is complete. (Fully charged.) - 8 - SW-Stahl und Werkzeugvertriebs GmbH Tel. +49 (0) 2191 / 46438-0 www.swstahl.de Leverkuser Straße 65 Fax +49 (0) 2191 / 46438-40 D-42897 Remscheid...
2. Start slowly to engage and not damage the threads. Once the thread is positively engaged, the speed can be increased to facilitate the work. - 9 - SW-Stahl und Werkzeugvertriebs GmbH Tel. +49 (0) 2191 / 46438-0 www.swstahl.de Leverkuser Straße 65 Fax +49 (0) 2191 / 46438-40 D-42897 Remscheid E-Mail: info@swstahl.de...
Need help?
Do you have a question about the S3202 and is the answer not in the manual?
Questions and answers