Olympus Stylus TOUGH-8000 Instruction Manual page 48

Saving battery power between shots
[POWER SAVE]
E SETUP POWER SAVE
Submenu 2
OFF Cancels [POWER SAVE].
When the camera is not being
used for approx. 10 seconds, the
ON
monitor automatically turns off to
save battery power.
To resume standby mode
Press any button or turn the mode dial.
Using the LED illuminator as an
auxiliary light [LED ILLUMINATOR]
E SETUP LED ILLUMINATOR
Submenu 2
OFF Disables the LED illuminator.
ON Enables the LED illuminator.
"Using the LED illuminator" (p. 24)
48 EN
Application
Application
Displaying the current altitude/
water depth (atmospheric/hydraulic
pressure) [MANOMETER]
E SETUP MANOMETER
The readings may have a margin of error
depending on meteorological conditions.
Use the readings only for your reference.
Submenu 2
OFF Cancels the manometer display.
Displays the current altitude/
water depth (atmospheric/
ON hydraulic pressure) in the
shooting standby mode screen.
(–10 m to 5,000 m)
Proceed to the setting screen.
CALIBRATE
See below.
When set to [ON], a warning message
appears in the monitor as a water depth
close to 10 m (32.8 ft) is reached.
To adjust the altitude/water depth
display
1 Use 12 to select the current altitude/
water depth, and press the o button to
set.
CALIBRATE
BACK
Selecting the display units for the
manometer [m/ft]
E SETUP m/ft
Submenu 2
m This displays in meters.
ft This displays in feet.
Application
1200m
SET
OK
MENU
Application