Pixel Mapping - Olympus Stylus TOUGH-8000 Instruction Manual

Adjust the settings for the functions while referring to "Using the Menu" (p. 3).
Resetting the fi le name numbers of
pictures [FILE NAME]
E SETUP FILE NAME
Folder name Folder name
DCIM 100OLYMP
999OLYMP
Automatic
numbering
Pmdd
Submenu 2
This resets the sequential number
for the folder name and fi le name
RESET whenever a new card is inserted.
This is useful when grouping
images on separate cards.
Even when a new card is inserted,
this continues the numbering for
the folder name and fi le name from
AUTO the previous card. This is useful for
managing all image folder names
and fi les names with sequential
numbers.
The number for the folder name is reset to 100, and
*1
the one for the fi le name is reset to 0001.
File name
Pmdd0001.jpg
Pmdd9999.jpg
Automatic
numbering
Month: 1 to C
(A=October,
B=November,
C=December)
Day: 01 to 31
Application
*1
Adjusting the CCD and adjusting the
image processing function

[PIXEL MAPPING]

E SETUP PIXEL MAPPING
This function has already been adjusted
at factory shipping, and no adjustment is
needed right after purchase. Approximately
once a year is recommended.
For best results, wait at least one minute
after taking or viewing pictures before
performing pixel mapping. If the camera is
turned off during pixel mapping, be sure to
perform it again.
To adjust the CCD and the image
processing function
Press the o button when [START]
(Submenu 2) is displayed.
●
The camera checks and adjusts the CCD and the
image processing function at the same time.
EN 45