Yamaha CRD-HD1300 Service Manual page 24

CDR-HD1300/CDR-HD1300E
QQ
3 7 63 1515 0
Step Item
4 CD-RW
recording
TE
L 13942296513
Step Item
5 Copying
CD HDD
www
.
24
http://www.xiaoyu163.com
Mode Input signal
Normal mode
CD player
DIGITAL OUT
or
ANALOG OUT
Mode Input signal
Normal mode
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Check method and standard
Disc
Execute HDD formatting when HDD for jigs has
CD-RW
been installed. (Refer to "Formatting HDD" on
p. 27.)
1. Press the "CDR" key to select CD-R/W drive
and then press the "
and set unfinalized CD-RW disc, and close
the tray.
2. Press the REC key.
• When it is judged as necessary to adjust the
laser output for the disc being set, "OPC
Adjust" is displayed and the laser output is
automatically adjusted. (Adjustment takes
approximately 15 seconds.)
• When it is judged unnecessary to adjust the
laser output for the disc being set, "Standby"
is displayed.
After a few seconds, "0 00" is displayed.
3. Press the "INPUT" key to select the external
sound source.
4. Press the "
5. Press the "
Recommended recording time is over 20
seconds.
6. Wait for the track numbers to be displayed.
Turn the "MULTI JOG" knob to select the last
recorded track.
7. Press the "
and confirm it recorded correctly.
8. Press the "
CDR-HD1300/CDR-HD1300E
Q Q
DIGITAL IN
3 6 7 1 3 1 5
or
ANALOG IN
Check method and standard
Disc
1. Insert a CD into the tray and close the tray.
CD
2. Press the "COPY" key once to go to COPY
Standby mode, blue LED at right side and
amber LED at left side begin to blink slowly.
3. Press the "
4. Press the "
Recommended recording time is over 1 track
time.
5. Press the "HDD" key to select HDD.
6. Press the "
recorded track and confirm it recorded
correctly.
7. Press the " " key, remove the disc and close
the tray.
8. Check the disc and track numbers with
recorded contents for testing.
9. Press the "HDD" key to select HDD.
10. Press the "MENU" key and turn the "MULTI
JOG" knob to select "Disc Edit" and then
press the "MULTI JOG" knob.
11. Turn the "MULTI JOG" knob to select "Disc
Erase" and then press the "MULTI JOG"
knob.
12. Select the disc No. with recorded contents
for testing by turning the "MULTI JOG" knob
co
and press it.
13. Press the "COMPLETE" key to erase the
selected disc.
.
14. If there are more than one discs with
recorded contents for testing, repeat Steps
11, 12 and 13.
* If it is allowed to format HDD, execute
formatting instead of performing Steps 8 and
after.
9 4 2 8
" key to open the tray
" key to start recording.
" key to stop recording.
" key to play back the track
" key and remove the disc.
0 5 8 2 9 9 4 2 8
" key to start copying.
" key to stop copying.
" key to play back the
m
9 9
9 9