Using Virtual Wall Mode - iRobot Braava jet Owner's Manual

Using Virtual Wall
You can create an invisible barrier with
the Virtual Wall Mode so that the robot
®
will avoid cleaning part of a room or a
different floor type.
• Begin with the robot powered off.
When placing the robot, note that the
invisible line will be created in line with
the back of the robot.
• To activate Virtual Wall Mode, start with
a powered-off robot and press and
hold the CLEAN button until two blue
lines appear on the top of the robot.
The blue lines will indicate that the
Virtual Wall Mode has been activated.
Mode
®
Cleaning Tip: You can also use Virtual
Wall Mode to divide a larger room into
smaller areas to help Braava jet clean
more efficiently.
Braava jet™ Owner's Guide
EN
13