Press 2Y.
1
Press 12 to select [ON], and press e.
2
3
Press the shutter button fully to take the picture.
The self-timer lamp lights for approximately 10 seconds after
the shutter button is pressed, then starts blinking. After
blinking for approximately 2 seconds, the picture is taken.
En
Press 3#.
1
Press 43 to select the flash mode, and press e.
2
3
Press the shutter button halfway.
When the flash is set to fire, the # mark lights.
4
Press the shutter button completely to take the picture.
Icon
Auto flash
AUTO
Red-eye
!
reduction flash
#
Fill-in flash
$
Flash off
Power Save Feature
To save battery power, the camera automatically enters sleep mode and stops
operating if not used for 3 minutes in shooting mode. Press the shutter button
or zoom button to reactivate the camera.
If the camera is not operated for 15 minutes after the camera enters sleep
mode, it automatically retracts the lens and turns off. To resume operation, turn
on the power again.
14
Self-Timer
Flash Modes
Flash Mode
The flash fires automatically in low light or backlight
conditions.
This emits pre-flashes to reduce the occurrence of red-
eye in your pictures.
The flash fires regardless of the available light.
The flash does not fire.
Self-Timer Lamp
Description