Table of Contents
Advertisement
【PPPoE setup】
Enable：Reverse■ means choose,setting can become effective.
Input the user name and password that ISP（Internet service provider）provides. After saving it
reboot up your system. Then the NVR will build a network connection based on PPPoE. The IP address
will change into dynamic IP address after above operation is well done.
Operation：After PPPoE dialing successfully look up the IP address in the [IP address] and obtain t
he current IP address. Then use this IP address to visit the NVR through user port.
【NTP setup】
The NTP server must be installed in the PC.
Enable：Reverse■mean choose，setting can become effective.
Host computer IP:Input the IP address installed NTP server.
Port:Default: 123. You can set the port according to NTP server.
Time zone:London GMT+0 Berlin GMT +1 Cairo GMT +2 Moscow GMT +3 New Delhi GMT
+5 Bangkok GMT +7 Hongkong Beijing GMT +8 Tokyo GMT +9
Picture4.16 PPPOE
Picture 4.17 NTP
49 / 91
Sydney GMT +10 Hawaii
Advertisement
Table of Contents
