Acumen AiS Installation Manual page 29

Cruise Button
2）The Calls of Cruise between Points
In Picture 3.10, click Page Shift button, enter PTZ control menu as shown in Picture 3.12. Please
input the number of cruise in the value blank, then click Cruise between Points button, PTZ begins to
work on the cruise line. Click Stop button to stop cruise.
3、Scan
PTZ also can work on the preset scan line repeatedly.
1）Scan setup
Setting steps:
Step1: In Picture 3.10, click Setup button ，enter Picture 3.14；
Step2: Click Scan button，the input proper value in the scan value blank;
Step3: Click Start button, enter Picture3.10 ， here you can set the following items:
Zoom,Focus,Aperture,Direction and so on. Click Setup button to go back Picture 3.14
Step4: Click End button to complete setup。Click the right button of the mouse to exit.
Scan Button
Picture 3.14 Cruise Between Points Settings
Picture 3.15 Scan Setup
29 / 91
Preset Points Blank
Time interval
Cruise Line Blank
Scan value blank