Technical Specifications - SPIT SD 16E Operator's Manual

TECHNICAL SPECIFICATIONS

Power
Voltage
Frequency
Current
No load speed
Full load speed
Maximum drill potential
Connection
Safety mechanism
Thermal safety mechanism
Protection against excess pressure
Protective class
Cable
Weight
Measurements
Hand grip
Noise and vibration
The indication of noise emission is measured after DIN 45 635, part 21.
The level of acoustic pressure on work site could exceed 85 dB (A); in this case
protection means must be used.
The typical hand-arm vibration is below 2.5 m/s².
Measured values determined according to EN 60 745.
The declared vibration emission level represents the main applications of the tool. How
ever if the tool is used for different applications, with different accessories or poorly
sure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the
times when the tool is switched off or when it is running but not actually doing the job.
Identify additional safety measures to protect the operator from the effects of vibration
such as: maintain the tool and the accessories, keep the hands warm, organisation of
work patterns.
3
1800 W
230 V
40-60 Hz
7,7 A
-1
0 - 3000 min
-1
0 - 2050 min
Ø 131 mm
M16
torque limiter
yes
through an electronic system
II
5 m
5,9 kg
456 x 138 x 93 mm
yes