Makita BHP460 Instruction Manual page 5

Specific Safety Rules
USB023 1
1. Hold
tool by
insulated
gripping surfaces
when
performing an operation where
the cutting tool may contact hidden wiring.
Contact
with a "live" wire will
make exposed metal parts of the tool "live" and shock The operator.
2. Be aware that this tool is always in an operating condition, because
it
does
not have t o be plugged into an electrical outlet.
3.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in high locations.
4. Hold the tool firmly.
5. Keep hands away from rotating parts.
6.
Do not leave the tool running. Operate the tool only when hand-held.
8. Do
not
touch the bit or the workpiece immediately after operation; they may
be extremely hot and could burn your skin.
SYMBOLS
The followings show the symbols used for tool.
v
....................................
volts
-
_ _ _ _
....................................
direct current
k
.................................... no load
speed
.../
min
...................................
revolutions
or
reciprocation per minute
b
....................................
number
of
blow
5