Olympus SP-550UZ Instruction Manual page 70

Monitor indication
ME MORY SE T UP [ I N ]
POWER OFF
MEMORY FORMAT
SET
OK
NO CONNECTION
NO PAPER
NO INK
JAMMED
SETTINGS
CHANGED
PRINT ERROR
r
CANNOT PRINT
70
EN
Possible cause
There is an error in the
internal memory.
The camera is not
connected to the computer
or printer correctly.
There is no paper in the
printer.
The printer has run out of
ink.
The paper is jammed.
The printer's paper tray has
been removed or the printer
has been operated while
changing settings on the
camera.
There is a problem with the
printer and/or camera.
Pictures recorded on other
cameras may not be printed
on this camera.
Corrective action
Select [MEMORY FORMAT] [YES] and
press o. All data in the internal memory is
erased.
Disconnect the camera and connect it
again correctly.
Load some paper in the printer.
Replace the ink cartridge in the printer.
Remove the jammed paper.
Do not operate the printer while changing
settings on the camera.
Turn off the camera and printer. Check the
printer and remedy any problems before
turning the power on again.
Use a computer to print.