Olympus SP-550UZ Instruction Manual page 24

When [PRESET] is selected
PRESET WB
5
3
1
w
BACK
MENU SET
When [V] is selected
• With the [ONE TOUCH WB] screen displayed, point the camera at a sheet of white paper.
Position the paper so that it fills the screen, making sure there are no shadows.
• Press o. The new white balance is set.
ISO .......................................................................................
AUTO
HIGH ISO AUTO
50/100/200/400/
800/1600/3200/
5000
• If set to over [3200], [IMAGE QUALITY] is limited to below [2048x1536].
• If [FINE ZOOM] or [DIGITAL ZOOM] is set to [ON], [3200] and [5000] cannot be set.
• If [DRIVE] is set to [c] or [d(15fps)], [HIGH ISO AUTO], [50], [100] and [200] cannot be set.
24
EN
Press 12 to select a white balance setting, then press o.
OK
o
Sensitivity is automatically adjusted according to the conditions of the
subject.
This function has a higher sensitivity compared to [AUTO] and
stabilizes the blur caused by a moving subject or camera movement
when taking pictures.
A low value lowers the sensitivity for daylight shooting of clear, sharp
pictures. The higher the value, the better the camera's light sensitivity
and ability to shoot with a fast shutter speed and in low light conditions.
However, high sensitivity introduces noise into the resulting picture,
which may give it a grainy appearance.
Changing the ISO sensitivity