Installing Power Supplies - Alcatel-Lucent OmniSwitch 6900 Hardware User's Manual

Chassis and Power Supplies

Installing Power Supplies

1 Orient the power supply so that the power cord socket is situated at the right of the power supply. Also,
for the power supply to seat properly, make sure that the handle is in the vertical position as shown.
2 Slide the power supply back until it is securely seated in the the chassis backplane.When the connector
is fully seated, the lock tab will click and to hold the power supply in place.
3 Plug the power cord (provided) into the power supply's socket.
Note. The chassis does not provide an on/off switch. Connecting a the power supplies to a power source
will boot the switch.
OmniSwitch 6900 Hardware Users Guide
Lock Tab
September 2011
Power Supplies
page 2-21