Table of Contents
Advertisement
Press
Keywords and look up Sound for adjusting
individual sound settings.
Sound settings
Bass
With Bass, you can adjust the level of low tones in the
sound.
To adjust the level . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Bass.
3 - Press (right) and adjust the value
with (up) or (down).
4 - Press , repeatedly if necessary, to close the
menu.
Treble
With Treble, you can adjust the level of high tones in
the sound.
To adjust the level . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Treble.
3 - Press (right) and adjust the value
with (up) or (down).
4 - Press , repeatedly if necessary, to close the
menu.
Surround mode
With Surround mode, you can set the sound effect of
the TV speakers.
To set the surround mode . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Surround mode.
3 - Press (right) and select Stereo or Incredible
surround.
4 - Press , repeatedly if necessary, to close the
menu.
Headphones volume
With Headphones volume, you can set the volume of
the connected headphones separately.
To adjust the volume . . .
1 - Press and select Headphones volume and
press OK.
2 - Press (up) or (down) to adjust the volume.
3 - Press , repeatedly if necessary, to close the
menu.
Advanced sound settings
Auto volume leveling
With Auto volume leveling, you can set the TV to
automatically level out sudden volume differences.
Typically at the beginning of adverts or when you are
switching channels.
To turn on or off . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > Auto
volume leveling.
3 - Press (right) and select On or Off.
4 - Press , repeatedly if necessary, to close the
menu.
Delta volume
For analog TV and HDMI source only.
Delta volume is a fine volume adjustment for
individual channels. With Delta volume, you can
increase the volume for channels with a weaker audio
signal or decrease the volume for channels with a
stronger audio signal. The setting will be stored for
specific channels. The TV speakers must to be set to
"On".
TV speakers
You can send the TV sound to a connected audio
device - a Home Theater System or audio system.
With TV speakers, you select where you want to hear
the TV sound and how you want to control it.
• If you select Off, you permanently turn off the TV
speakers.
• If you select On, the TV speakers are always on.
With an audio device connected with HDMI CEC, you
can use one of the EasyLink settings.
• If you select EasyLink, the TV sends the TV sound to
the audio device. The TV will turn off the TV speakers
when the device is playing the sound.
• If you select EasyLink autostart, the TV will turn on
the audio device, send the TV sound to the device
and turn off the TV speakers.
With EasyLink or EasyLink autostart selected, you
can still switch to TV speakers or device speakers in
the Picture and sound menu.
To set the TV speakers . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > TV
speakers.
3 - Press (right) and select Off, On, EasyLink or
EasyLink autostart.
4 - Press , repeatedly if necessary, to close the
45
Advertisement
Table of Contents
