Ford Ranger Owner's Manual page 265

Note: Do not lay alloy road wheels face
down on the ground.
3
E79153
1. Assemble the jack handle.
Note: Assemble the three handles to jack
the rear of the vehicle.
2. Ensure screw thread on the jack is
adequately lubricated before use.
3. Loosen the wheel nuts.
4. Raise your vehicle until the tire is clear
of the ground.
E134693
5. Remove the wheel nuts and the road
wheel.
Ranger (), EB3B-19G219-ZAB enAUS
Wheels and Tires
2
1
Installing a Road Wheel
WARNINGS
Use only approved wheel and tire
sizes. Using other sizes could
damage the vehicle and will void the
warranty. See Technical Specifications
(page 264).
Do not fit run flat tires on vehicles
that were not originally fitted with
them. Please contact your dealer for
more details regarding compatibility.
Make sure that there is no lubrication
(grease or oil) on the threads or the
interface between wheel studs and
nuts.
Have the tightening torque of the
wheel nuts and the tire pressure
checked as soon as possible.
Do not install alloy wheels using
wheel nuts designed for use with
steel wheels.
Note: The wheel nuts of alloy wheels and
spoked steel wheels can also be used for
the steel spare wheel for a short time
(maximum two weeks).
Note: Make sure the wheel and hub contact
surfaces are free from foreign matter.
Note: Make sure that the cones on the
wheel nuts are against the wheel.
1. Install the wheel.
2. Install the wheel nuts finger tight.
3. Install the locking wheel nut key.
263