Daytime Running Lamps; Front Fog Lamps; Rear Fog Lamps - Ford Ranger Owner's Manual

Hide thumbs Also See for Ranger:
Table of Contents

Advertisement

Note: With the headlamps in the
autolamps position, you cannot switch the
high beam headlamps on until the
autolamps system turns the low beam
headlamps on.

DAYTIME RUNNING LAMPS

WARNING
Always remember to switch your
headlamps on in low light situations
or during inclement weather. The
system does not activate the tail lamps
and may not provide adequate lighting
during these conditions. Failure to activate
your headlamps under these conditions
may result in a collision.
To switch the system on:
1.
Switch the ignition on.
2. Switch the lighting control to the off or
autolamp position.

FRONT FOG LAMPS

Type 1
E205677
Ranger (), EB3B-19G219-ZAB enAUS
Lighting
Type 2
E132709
Press the button to switch the fog lamps
on or off.
Rotate the control lever to switch the fog
lamps on or off.
You can switch the fog lamps on when the
lighting control is in any position except
off.
Note: Only use fog lamps during reduced
visibility, for example fog, snow or heavy
rain.
Note: If you switch autolamps on, you can
only switch the front fog lamps on when the
headlamps are on.

REAR FOG LAMPS

Type 1
E205678
49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents