Declaration Of Conformity - Bosch PSR 300 LI Operating Instructions Manual

OBJ_BUCH-89-004.book Page 29 Thursday, October 19, 2006 8:26 AM
The vibration emission level given in this informa-
WARNING
tion sheet has been measured in accordance
with a standardised test given in EN 60745 and may be used to
compare one tool with another.
The vibration emission level will vary because of the ways in which
a power tool can be used and may increase above the level given
in this information sheet. This could lead to a significant underes-
timate of exposure when the tool is used regularly in such a way.
Note: To be accurate, an estimation of the level of exposure to
vibration experienced during a given period of work should also
take into account the times when the tool is switched off and when
it is running but not actually doing the job. This may significantly
reduce the exposure level over the total working period.

Declaration of Conformity

We declare under our sole responsibility that this product is in
conformity with the following standards or standardization docu-
ments: EN 60745 (Battery powered products) and EN 60335
(Battery charger) according to the provisions of the directives
73/23/EEC, 89/336/EEC, 98/37/EC.
06
Dr. Egbert Schneider Dr. Eckerhard Strötgen
Senior Vice President Head of Product
Engineering Certification
25.09.2006, Robert Bosch GmbH, Power Tools Division
D-70145 Leinfelden-Echterdingen
2 609 001 313 • 19.10.06
English | 29