NY button
a
Press NY in shooting mode to select ON or OFF for the self-timer.
Press to set.
OFF
ON
• After setting the self-timer, press the shutter button completely. Then, the self-timer lamp
lights for approximately 10 seconds, blinks for approximately 2 seconds, and the shutter is
released.
• To cancel the self-timer, press NY.
• Self-timer shooting is automatically canceled after one shot.
Y# button
b
Press Y# in shooting mode to select the flash mode.
Press to set.
AUTO
Flash auto
!
Red-eye reduction
flash
#
Fill-in flash
$
Flash off
m button
c
Displays the top menu.
/S button
d
Increasing the brightness of the monitor (Backlight boost)
The monitor lights brighter when is pressed in shooting mode. If there is no operation for
10 seconds, it dims back to the original brightness.
• When [BRIGHT] is selected in [s], the monitor brightness does not change.
S Erasing pictures
In playback mode, select the picture you want to erase, and press S.
• Once erased, pictures cannot be restored. Check each picture before erasing to avoid
accidentally erasing pictures you want to keep.
g "0 Protecting pictures" (P. 25)
16
EN
Cancel the self-timer.
Set the self-timer.
The flash fires automatically in low light or backlight conditions.
This emits pre-flashes for red-eye reduction.
The flash fires regardless of the available light.
The flash does not fire.
Increasing the brightness of the monitor (Backlight boost)/
Self-timer shooting
Flash shooting
Displaying the top menu
Erasing pictures