To Return The Settings Of Functions To Default Settings; Playback Help And Troubleshooting Tips; Playback Tips; Quickly Displaying A Desired Picture - Olympus FE-280 Instruction Manual

To return the settings of functions to default settings

• To return the changed shooting settings to default settings while shooting, set [RESET] to [YES].
g "RESET Changing the shooting functions back to default settings" (P. 19)
• All shooting settings except P mode return to default settings when the camera is turned off.

Playback help and troubleshooting tips

Blurry images cannot be stabilized
• Even if [DIS EDIT] is selected, not all blurry pictures can be fixed.
• If the shutter speed is low and/or if the digital image is severely shaken: The recorded
picture may not be stabilized or cannot acquire the proper stabilization effect.
• Moving object: The image cannot acquire the proper stabilization effect.
• In addition, the digital image stabilization mode cannot be activated when:
• the internal memory capacity or the card capacity is insufficient.
• the image was extracted from a movie, the image was shot with another camera, or
the image was already fixed with Digital Image Stabilization Edit.
The red-eye cannot be fixed
• Depending on the picture, the red-eye may not be fixed. Also, parts except the eye may be fixed.

Playback tips

Playing back pictures in the internal memory
• When a card has been inserted in the camera, the pictures in the internal memory cannot be played
back. Pull out the card before operating the camera.

Quickly displaying a desired picture

• Press the zoom lever to the W-side to display the pictures as thumbnails (index display).
g "Zoom lever Zooming while shooting/Close-up playback" (P. 15)

Erasing sound recorded to still pictures

• Once sound is added to a picture, it is not possible to erase the sound. In this case, make a re-
recording with silence.
g "R Adding sound to still pictures" (P. 25)

Viewing pictures on a computer

Viewing the entire picture on a computer screen

The size of the picture displayed on a computer screen changes depending on the computer settings. When
the monitor setting is 1,024 × 768 and you are using Internet Explorer to view a picture with an image size of
2,048 × 1,536 at 100%; the entire picture cannot be viewed without scrolling. There are several ways you can
view the entire picture on the computer screen.
View the picture using image browsing software
• Install the OLYMPUS Master 2 software from the provided CD-ROM.
Change the monitor setting
• The icons on the computer desktop may be rearranged. For details on changing the settings on your
computer, refer to the computer's instruction manual.
47
EN