Olympus FE-280 Instruction Manual page 27

W
................................................................................................. Selecting a display language
You can select a language for on-screen display. Available languages vary depending on where you
purchased this camera.
You can add other languages to your camera with the provided OLYMPUS Master software.
PIXEL MAPPING
......................................................Adjusting the image processing function
The pixel mapping feature allows the camera to check and adjust the CCD and image processing functions.
It is not necessary to operate this function frequently. Approximately once a year is recommended. Wait at
least one minute after taking or viewing pictures to allow the pixel mapping function to perform properly. If you
turn the camera off during pixel mapping, start again.
Select [PIXEL MAPPING]. When [START] is displayed, press .
K/q
........................................................... Turning on the camera with the
• Pressing K turns on the camera and starts the camera in the shooting
YES
• Pressing q turns on the camera and starts the camera in the playback
NO The power is not turned on. To turn on the camera, press POWER button.
s
..............................................................................................Adjusting the monitor brightness
BRIGHT/ NORMAL
BEEP
....................... Adjusting the volume of operation sound when the buttons are pressed
OFF (No sound)/
8
...................................................................... Adjusting the volume of camera warning sound
OFF (No sound)/
SHUTTER SOUND
OFF (No sound)/
VOLUME
......................................................................... Adjusting the volume during playback
SETUP
1
2 BEEP
3
SHUTTER SOUND
VOLUME
BACK SET OK
MENU
mode.
mode.
LOW /HIGH
LOW / HIGH
...............................................Adjusting the volume of the shutter button
LOW / HIGH
• Press ON to adjust the volume.
• You can adjust the volume to one of five levels or mute the volume.
q
K
or button
27
EN